I will explain OSP NC spec encryption algorithm soon.
There will be no such thing as "OPTIONAL"
I will explain OSP NC spec encryption algorithm soon.
There will be no such thing as "OPTIONAL"
"Imagination is more important than knowledge."
Hi kurmay, any news?
Inviato dal mio LG-H850 utilizzando Tapatalk
it is not very clear to me.
Do you unlocked something?
Inviato dal mio LG-H850 utilizzando Tapatalk
It is very clear for someone's.
"Imagination is more important than knowledge."
i think i got it
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
So without encryption algorithm we have nothing right?
Experience is what you get just after you needed it.
if this helps,here is same block for serial 105941
So do you think proper encryption...or maybe just obfuscation? bit shift/ or add subract serial number? Shame we don't have exact same machine before after an okuma optional feature add. I'm doubtful of AES or DES encryption as US/JAPAN export/import rules would limit many encryption algorithms....plus CPU isn't monster on older machines.
Let me know if I can help in your endeavor.
5020L controls. Can I increase the memory? Would this be related?
Kind of related. First level upgrade is bit setting only. Unfortunately it just changes mapping if BB0: and BB1: so you already have useable memory in BB0: . Yes you can use it but don't fill it or you'll get into trouble.
Next levels actually add hardware to increase memory. Expensive and may no longer be available through Okuma.
Best regards,
Ps> hello mcCoyheavy... how's the fecon working? ;-)
Experience is what you get just after you needed it.
Can you help me, where can i find the ec spec and nc spec code, or what filename should i locate those spec code.
Attached is the OSP management card.
For LT15-MY
5020L
Thanks.
Last edited by Dell1026; 08-01-2018 at 03:16 PM.
File name is LCU06-00-A.PBU for 5000series lathes.
You can find in BB0 memory.
"Imagination is more important than knowledge."