I bought a new CNCRP Pro 4896, installed the version of Mach3 they recommended. Also used their xml file.. I also installed an XHC pendant..
My problem is, when I use the arrow keys to jog, it moves about .028 (different each time).. on the pendant, it moves about .020 but will come back to the same place if I turn the wheel back.. I turned it to 2% for .001 but it still moves .020+ each time. When I try to adjust the FRO, doesn't matter if it all the way down or up, nothing changes in the speed of movement..
Is there some way to adjust this?