Found this very long table from little machine shop. To clear up any confusion, I believe early x3's only had tables about a foot long. The current x3/sx3 has a table about 21" 5/8 long and I just found this aftermarket one from little machine shop that's 27.5" long! But you can't see any threads on the leadscrew that comes with it in the picture. I don't know if it's 10 tpi or 8 tpi. I wonder if this table is hard on the ways in the base and saddle when you extend it all the way? It's 54 pounds hanging off one side! https://littlemachineshop.com/produc...ProductID=3845