Re: TM 7045 FG cnc conversion
John,
Please explain the process you used to lap the rail mounting surface.
Awesome work!
Jeff...
Originally Posted by
John1987
Hello. I decided to share my cnc conversion project of TM 7045 FG mill. This milling machine is a clone of ZAY 7045, RF 45 and so on.
The dovetails on the column was poor quality, so i decided to cut them away and install linear rails. A portion of lapping was required to make perfect flatness for linear rails.
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.