[Agebot]

We pulled a couple of these apart late last year to make room for new machinery after failing to find a buyer.

Structure, frames and panels went to the recyclers.

Servos, ballscrews, toolchanger, hydraulics, wiring and full control cabinets with working MDI displays, controls, bubble memory and servo/spindle drives have gone up on storage racks.

What's the best way of selling some of these parts and making sure they go to a good home?

Adrian

[shas595]

We pulled a couple of these apart late last year to make room for new machinery after failing to find a buyer.

Structure, frames and panels went to the recyclers.

Servos, ballscrews, toolchanger, hydraulics, wiring and full control cabinets with working MDI displays, controls, bubble memory and servo/spindle drives have gone up on storage racks.

What's the best way of selling some of these parts and making sure they go to a good home?

Adrian

Hello Adrian

Your best bet to get rid of these parts is probably eBay, lots of exposure for very little cost and that’s where many people search to find secondhand parts. May I ask what controls did you have on these?

John


Sent from my iPhone using Tapatalk

[Agebot]

Hey John,

They're Fanuc 11M's with a Seicos sub-system. They were both working until I put my hands on them, bit sad but we couldn't find a buyer.

Adrian

[shas595]

Hey John,

They're Fanuc 11M's with a Seicos sub-system. They were both working until I put my hands on them, bit sad but we couldn't find a buyer.

Adrian

Yes, the used machine market is very tough. I’d be interested in a copy of the parameters of you could supply, I would appreciate it. I’m working in one now thy is missing the Fanuc side PMC data and I can’t source anywhere

John


Sent from my iPhone using Tapatalk

[Agebot]

I'll take a look when I'm back on Monday.