Hello everyone. I recently accepted a job at a medium sized medical manufactur a nu mer. Recently was informed that the current swiss programmer is leaving.
ged My question is this. He had stated to me that he saves a lot of his programs on his c drive not the company network drive. He also was a statement that the memory card he is using to upload programs to the machine is his and that he would be taking it with him. Today is his last day. I’m really concerned because yesterday proving out a program on a very detailed bone screw. During inspection of first piece I found that a lead in angle was off by 5 degrees it’s a critical dimension plus or minus 1 degree. Earlier in the day he had stated that this program had made several hundred parts. But failed to mention that these parts were slightly different. Except for the fact the angle I mentioned which is identical on all part numbers. So the program had to be modified to correct.
The past few days he’s been quite short with me and generally acting like a prick. What should be done. Personally I think his company computer and any memory cards or usb sticks should not be allowed to leave with him. He seems like the type that corrects program errors on his computer saves to card. But never saves the changes.
Need advice quickly