Hello Folks,
After playing with my first router over a year now it is time to start the second build.
Before start to the build log, I will share some information/media about 1st Router.
First Machine;
- Nema 23 step motors (started with 2.2nm later upgraded to 4nm)
- Leadshine AM882 drivers +68v PSU
-1610 ballscrews on X and Y , 1605 on Z
-15mm lineer rails on all axis
- Pokeys cnc controller
- Aprox. 60cmx45cm cutting area
- Kress 1Kw router