Houston we have a problem!
So far the board work fine.
My today job:
1) Activate the VCP in “Properties” – “Advanced” – “Load VCP” (Virtual Com Port)
2) Reboot the PC
3) Install driver for new KFLOP - USB Serial Port
4) Instal Tera Term software for serial communication
5) open it and configure KFLOP Port (9600)
6) Try some command: Version, Reboot! All command work fine...
but...
from now on the KMotion software it no longer worked!
Apperar two little windows :
KMotion present but not responding - Correct problem and restart application
or
Can't connect to KMotion Board #0
I try several things:
1) Reinstalled new drivers, for KFLOP USB and KFLOP Serial (COM)
2) Reinstalled KMotion Software 4.33 and then 4.34
3) Reinstalled the board on another PC
4) Extreme and last resort: RECOVERY (firmware)
No method worked!
KMotionCNC or KMotion don't work
But the strange thing is that Tera Term on KFLOP serial Port still work!! (type Version, Reboot! or other command these work!)