[Fenichel]

When I try to write the edited file out, permission is denied.

[kheston]

When I try to write the edited file out, permission is denied.

Interesting. The smb.conf.share should be owned by you, not sure why you're seeing a permissions error. Try:

sudo nano smb.conf.share

[Fenichel]

That solved the write=permission problem, but after saving & rebooting, PP 2.0 still can't see the shared file.

[kheston]

Run smbstatus to see if there are any problems:

sudo service samba restart
sudo smbstatus

[Fenichel]

Run smbstatus to see if there are any problems:

sudo service samba restart
sudo smbstatus

[kheston]

Your screen shot is identical to what I see when I run smbstatus.

Once I saw there were no errors, I needed to hard-reboot my PathPilot machine before I was able to see the gcode share again.

[Fenichel]

Your screen shot is identical to what I see when I run smbstatus.

Once I saw there were no errors, I needed to hard-reboot my PathPilot machine before I was able to see the gcode share again.

I've done that, but with no change in outcome.