Hello, I recently purchased a Chinese CNC Mill off of ebay. It came with USB Motion Controller software by PlanetCNC, no doubt a non-legit version. I don't care to use this. The mill was advertised as being compatible with Mach3 though the documentation was almost purely about the PlanetCNC software. There were pinouts for a parallel breakout but the pictures and description do not match my board, JP-382C. I did try the pinouts but I can't get anything to work in Mach3. I know something has to be getting to the parallel port of this board because when I go to the port settings in Windows XP and hit apply the z axis of the mill moves very briefly. If any one has information on this board I'd appreciate any assistance.

Here are some pictures of the board.

Top:


Bottom:


And the settings I have tried.








I got these settings from Kev Brook's excellent CNC Blog https://the-cnc.blogspot.co.uk/p/home.html Thanks for that Kev. (edit. Actually these setting may not match the ones on the blog. I did try those but I may have moved some things around after they didn't work.)