wiring of a MTP 1
two leds, 4 pins on the device going to a 5 pin
red goes to probe side A pressure plate NC
yellow goes to probe side B, attaches via the screw and a wire tag at the back NC
orange led1
brown led2
led1 + led2 are connected together
looking at front of probe, into 4 pin probe pointing down
AB
CD
A = YELLOW goes to probe
C = ORANGE LED1
B = BROWN LED2
D = RED to probe
red attaches to other side of probe
yellow connects here, to bolt that attaches to probe
yellow connects here, to bolt that attaches to probe
hirose connectors
might be RM series
https://www.mouser.com/ProductDetail...IrZoAAFA%3D%3D