Hi,
I have a HAAS SL10 lathe with the "big bore" option (52mm bore) hence it has an A2-6 spindle , it is currently fitted with a E185 collet chuck, works fine for bar work, but every now and then I do need to do some chuck work, thing is this lathe has a 12 position tool turret and if I put the standard 8" power chuck I get all sorts of tool interference issues which means I need to rearrange my tool to only use 1 out of 2 tool position... rather a dumb design if you ask me...
So the "easy solution" would be to fit a 165 mm (6.5" max) diameter power chuck with a large bore (50mm) but that can be mounted on a A2-6 sindle (ie mounting bolts on a 5.25" circle), I've looked around but all the chucks in this size are made to go on a A2-5 spindle (mounting bolts on a 4.125" circle...), so the questionis does this even exist except as a made to order ?