[qigong]

So here is my question. I am kind of new on some of this. I have a 4th axis rotary. I been told I could exchange my 3 jaw chuck for a 4 jaw chuck. One company on ebay it would need to have a plate fabricated. So what do people think. I gotten both sides some says not need to fabricate one says yes. Just gather information would be helpful. thanks

[Jim Dawson]

It depends, you may need to have an adapter plate made. Just depends on what your rotary mount looks like and what the 4-jaw looks like. Post some pictures of what you have and links to what you have in mind.