Hello Every one

I have a problem with Mori Seiki MV-35/40, the principal problem were that ATC cycle didn't work properly, the problem were fixed.

now i tried to do an automatic tool change but for some reason the Error 3 light, now i follow the procedure to home the ATC cycle M80,89, but the Error is still light.

the problem is that i can't move the magazine manually pressing the button and using the M06TXXXX,

I have checked the PC parameters and

when pushing the magazine button i notice that there is no voltage in CR21 coil from CNR cable, this relay energized the magazine index motor solenoid.

any suggestion to reset the Error 3 or if it can restore it from the memory, I will appreciate for all your help...

Best regards.