Happy new year all.
First time doing this and I cant seem to get it right.
I am trying to program a .750 hex to cut in my lynx 220 LMS
I am trying to cut in in the sub spindle.
Here is the code:
%
O0001
G40
G13.1
G20
(TOOL - 7 OFFSET - 7)
( 3/8 FLAT ENDMILL)
G0 T0707
G18
M135
M8
G0 G55 Z-1.3125
X-1.2124
A0.
G97 S2500 M03 P12
G40
G12.1
G98 G1 X-1.2124 Z-.5 A-.1 F6.42
G42 X-.866 A0. F6.
X-.433 A-.375
X.433
X.866 A0.
X.433 A.375
X-.433
X-.866 A0.
G40 X-1.2124 A.1
G13.4
Z-.9 F300.
G0 Z-1.3125
M9
M134
G28 U0.
W0.
M05 P12
M30
%
The sub spindle does not want to index.
like I said new to this so hopefully I am missing something stupid.....
thanks
Jerry