Good afternoon.
I have been tasked with trying to get a Cincom L25 CNC machine to talk to an existing windows PC.
I can send text files from the Machine to the PC just fine, but when I try to send any file back the progress bar will get stuck in the same position and the display on the L25 will state E20 Over Run Error.
I have fiddled with just about every setting possible, but I am stumped and hoping that one of you lovely lot may have come across a similar problem, or direct me.
The PC communicated via the serial port with other devices, so I have sort of counted that out.
I have added a few pics to explain my situation.
Any help would be very much appreciated.
Software being used is called Terminal