Bonjour,
Excusez moi je ne parle pas anglais / Excuse me I do not speak English!!
J'aurais besoin de quelques renseignements sur l'utilisation du logiciel CNC USB Controller 1er version, le logiciel est fournie avec une CNC Fraiseuse 3020T Machine à gravure à 4 axes.
1) Je voudrais savoir si il est possible d'incrémenter les pas de déplacement X, Y, Z, en millimètre et ou dixième 0,1mm de millimètre en chiffre rond, je m'explique, au lieu d'avoir 1,4537 (exemple) avoir en lieu et place 1,0000, il y a peut-être une conversion a effectuer dans le logiciel? mais je ne sais pas où intervenir, le manuel est tout en anglais ceci me pose un problème de traduction
2) Concernant le palpeur (fourni avec la machine) est ce normale que lorsqu'il et en contact avec l'outil se soit l'axe Y qui devient rouge?
3) Y a-t-il un paramètre pour que se soit l'axe Z qui soit contrôlé ce qui me parait normale, et que le moteur de l'axe Z se coupe au moment du contact palpeur - outil
4) J'ai essayé la dernière version de votre logiciel mais il semblerait qu'il y ais des problèmes de compatibilité avec la carte contrôleur…
Je vous remercie d'avance pour votre retour d'information
Cordialement
Hello,
I need some information on the use of the software CNC USB Controller 1st version, the software is supplied with a CNC milling machine 3020T 4-axis engraving machine.
1) I would like to know if it is possible to increment the steps of displacement X, Y, Z, in millimeter and or tenth 0,1mm of millimeter in round number, I explain myself, instead of having 1,4537 ( example) have instead 1.0000, there may be a conversion to perform in the software? but I do not know where to intervene, the manual is all in English this poses a translation problem
2) With regard to the probe (supplied with the machine) is it normal that when it is in contact with the tool, the Y axis becomes red?
3) Is there a parameter for the Z axis to be controlled which seems normal to me, and that the motor of the Z axis turns off at the moment of the contact probe - tool
4) I tried the latest version of your software but it seems that there are compatibility problems with the controller card ...
I thank you in advance for your feedback
Cordially