586,103 active members*
3,398 visitors online*
Register for free
Login

Thread: System Reset Issue

Results 1 to 1 of 1
  1. 03-01-2018, 04:14 PM #1
    DecanterMan
    DecanterMan is offline Registered
    Join Date
    Feb 2018
    Posts
    2

    System Reset Issue

    Once our engraver is turned on during the system reset, the laser moves to the top right corner (pictured) and hits both the back and the side rail. I have attempted to replace the limit senors, but to no avail. Not sure if it was a poor installation or a parameter issue or what. If you have any guidance please let me know. Thanks!
    Attached Thumbnails Attached Thumbnails IMG_2623.jpg   IMG_2624.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Custom Macro #100+ reset issue
    By yaji63 in forum Fanuc
    Replies: 5
    Last Post: 04-27-2023, 06:23 PM
  2. Eumach tool change macro lost in system reset
    By dowens in forum Fanuc
    Replies: 3
    Last Post: 03-20-2017, 01:21 PM
  3. Electrical issue and reset when firing
    By dgchessman2 in forum Laser Engraving / Cutting Machine General Topics
    Replies: 24
    Last Post: 01-07-2016, 03:39 AM
  4. RF making my machine trip into reset issue !!
    By Danno in forum Uncategorised MetalWorking Machines
    Replies: 32
    Last Post: 01-08-2014, 01:21 PM
  5. System Reset 3M-C
    By Swemill in forum Fanuc
    Replies: 1
    Last Post: 01-15-2010, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules