586,082 active members*
3,593 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Cincinnati CNC > Arrow 1000 - “Application startup timeout. The exe name is CNC.EXE

Thread: Arrow 1000 - “Application startup timeout. The exe name is CNC.EXE

Results 1 to 2 of 2
  1. 03-08-2018, 03:48 PM #1
    PensFan1028
    PensFan1028 is offline Registered
    Join Date
    Mar 2018
    Posts
    13

    Arrow 1000 - “Application startup timeout. The exe name is CNC.EXE

    Upon boot up, while loading “Loading Machine mode (3 of 13)” it hangs for a minute or so then gives the following errors:


    “Application startup timeout. The exe name is CNC.EXE”


    Then

    “CNC overflow”

    All diagnostics pass, no fault lights from what I can see. Can reference the machine but as soon as you click to enter machine mode or try to run a program it locks up.

    This machine is already using a CF card for a hard drive.

    The machine was running fine at the end of the day yesterday. Any ideas?
    Reply With Quote Reply With Quote
  2. 03-08-2018, 05:53 PM #2
    PensFan1028
    PensFan1028 is offline Registered
    Join Date
    Mar 2018
    Posts
    13

    Re: Arrow 1000 - “Application startup timeout. The exe name is CNC.EXE

    Ended up being something corrupt on the drive. I put in the backup CF card and everything works as normal.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. NEED HELP Arrow 500 System Failed 8004d Realtime Timeout
    By leonmathis in forum Cincinnati CNC
    Replies: 4
    Last Post: 02-17-2016, 02:16 AM
  2. Real Time timeout errors on Milacron 1000
    By billetbones in forum Cincinnati CNC
    Replies: 3
    Last Post: 11-15-2014, 02:59 PM
  3. Cincinnati Arrow 1000 startup power consumption
    By mvas82 in forum Cincinnati CNC
    Replies: 7
    Last Post: 06-22-2013, 09:23 PM
  4. cincinnati arrow 1000 realtime timeout error
    By stuart wiezniak in forum Cincinnati CNC
    Replies: 2
    Last Post: 04-24-2013, 10:26 PM
  5. Arrow 500 Chiller - Need a bleed or startup procedure
    By Larry Callahan in forum Cincinnati CNC
    Replies: 0
    Last Post: 03-25-2010, 03:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules