Hey guys/gals,

New member here, but have used the site as an information resource for awhile now. I'm about to pick up a Compumill 4000 with operational Delta 20 control, but wondering about the height of the machine. I realize standard is around 100" with all components installed.

The pneumatic tool change assembly on the top is not an issue to remove, as I understand it, but I was hoping the spindle motor could also possibly be removed without too much trouble. Anyone have any input on motor removal? I know there are some Compumill owners out there, if someone could do me a solid and measure the height from floor to the top of the motor, and also to uppermost point on the machine if the motor/toolchanger were removed?

Thanks!