[Yepescnc]

Hi I have a Miyano BND-42C with a Miyano Fanuc 21 control and have a problem with the turret,when try to index the turret unclamped but doesn’t index,also when I push Turret Index and Spindle stop at the same time to try to reference same ,doesn’t index,already check the position sensor and be fine,so please give me a hand with this issue thanks

[Yepescnc]

On counters looks like the position is lost because the preset number is #12 but a I can’t change on current position,actually appears on #6 plus ender block symbol,but doesn’t take number 12 when trying to change to #12 (on MDI and PWE open) I appreciate any help thanks

[drdos]

On counters looks like the position is lost because the preset number is #12 but a I can’t change on current position,actually appears on #6 plus ender block symbol,but doesn’t take number 12 when trying to change to #12 (on MDI and PWE open) I appreciate any help thanks

That is because the ladder is probably writing to it. You will have to search the ladder by function (#5) till you find the counter. Post the ladder file and I can see what the conditions are to set it to 6. Normally you have a turret home procedure and the ladder will write #1 as the current position.