We have Centrum 2000 i think we have problem with parameters ,if somе оne have answer for this one problem please help us
whеre found and,how can put parameter
Beast regards
We have Centrum 2000 i think we have problem with parameters ,if somе оne have answer for this one problem please help us
whеre found and,how can put parameter
Beast regards
Hi Bobimik
What model Fanuc control do you have ?
Is your machine turning or machining centre
Punch turret press from Murata Widemann
We have alarm 914 ram parity (servo)
SYSTEM ERROR 0130-03
Hi,
is your machine booting ? if yes then...
Record All existing Parameters....DGN Screens, All Programms in detail....by taking clear Photos of each screen....or video .
shut down the machine....
Hold "0" + Del key ....start the machine......all parameters will be erased.....!
Re-Enter the parameters...manualy...or if you have backup / SRAM ...load it from it.
I do not know how to record the parameters my screen is frozen ,
we have same machine want to ask if the two Machine have the same parameters
оr whether it's possible to find the original parameters for the machine
thank you very much
I I tried with 0 + del some parameters have lost some of them myself
now report me more alarms, please for further help
Hi Bobimk
These alarms are due to axis software limits being zero.
Check in your parameter list for the settings and punch
them in.
Hello,
Do you happen to have a list of parameters for a murata CNC turret press, C2500?