Re: Optimum MH25V
Nice looking work Mr...we did just about the same thing on the Grizz.
Much later I happened on a thread on another forum that noted when you machine little slots for oil in the mating surfaces that they should be on a angle to the movement of the slide. The theory is if they're straight, the oil stay in the little trough and merely floats back and forth with the movement of the slide. If they are on an angle, the movement of the slide puts the oil troughs in a shear situation which forces the oil out into the clearance between the parts. I thought that sounded reasonable.
Stuart
"THE GRIZZ" photo album - https://goo.gl/photos/yLLp61jooprtYzFK7
Youtube - https://www.youtube.com/channel/UCT2lq9obzEnlEu-M56ZzT_A