[Rocksalt]

you may try these pc parameters settings
1006 = 100
1009 = 1000
1010 = 100
1014 = 8000
1015 = 100
3002 = 10000001 or 10010001
3003 = 01000000 for 10 stations turret or 10000000 for 12 stations turret.

Good Luck!

Parameter 3003 is not correct above, at least for my machine (SL-3 Mori) 6T control. Bit 7 is on for a 10 position turret and off for a 12 position. Than again, this is all controlled by the ladder and can be changed.

[dh08td]

PLC program is in the following chips:
Attachment 195866
here is text graphic example:

  00005 |  *ESP.M    MRDY                                                                    *ESP  | EMERGENCY STOP  
    1A  o---| |------| |---------------------------------------------------------------------( )---o 1C , 6G           
        |  038.4    006.3                                                                   102.4  | 6K , 7A           
        |             2A                                                                           | 7E , 9D           
        |                                                                                          |                   
  0 28A |   OSP     * 23A     224C                                                           *SP   | 56B, 63A          
    1B  o---|/|------| |------|/|------------------------------------------------------------( )---o 66B1B             
        |  210.0    038.5    280.1                                                          102.5  |                   
        |    5K                                                                                    |                   
        |                                                                                          |                   
  00012 |   ST.M     *ESP                                                                   B.SPS  | SPINDLE STOP    
    1C  o---| |--o---| |---------------------------------------------------------------------( )---o 1E 11CI           
        |  032.7 |  102.4                                                                   204.2  | 6M                
        |        |    1A                                                                           |                   
        |        |                                                                                 |                   
        |   DST  |                                                                                 |                   
    1D  o---| |--o                                                                                 o                   
        |  066.5 |                                                                                 |                   
        |        |                                                                                 |                   
        |        |                                                                                 |                   
        |  B.SPS |                                                                                 |   105F            
    1E  o---| |--o                                                                                 o                   
        |  204.2                                                                                   |                   
        |    1C                                                                                    |                   
        |                                                                                          |                   
  00017 |  *ESP.M                                                                            HIDR  | HIDROON           
    1F  o---| |------------------------------------------------------------------------------( )---o    1F             
        |  038.4                                                                            000.0  |                   
        |                                                                                          |                   
        |                                                                                          |                   
  00019 |  LOG_1     M10A                                                                    *ITX  | INTERLOCK X AXIS.
    1G  o---| |------|/|---------------------------------------------------------------------( )---o    1G             
        |  208.6    224.0                                                                   096.4  |                   
        |                                                                                          |                   
        |                                                                                          |                   
  00022 |  LOG_1     M20A                                                                    *ITY  | INTERLOCK Y AXIS.
    1H  o---| |------|/|---------------------------------------------------------------------( )---o    1H             
        |  208.6    224.1                                                                   097.4  |                   
        |                                                                                          |                   
        |                                                                                          |                   
  00025 |  LOG_1     M50A                                                                    *ITZ  | INTERLOCK Z AXIS.
    1I  o---| |------|/|---------------------------------------------------------------------( )---o    1I             
        |  208.6    224.2                                                                   098.4  |                   
        |                                                                                          |                   
        |                                                                                          |                   
  00028 |                                    ._______.                                             |                   
    1J  o------------------------------------o SUB 1 o---------------------------------------------o                   
        |                                    |  END1 |                                             |                   
        |                                    ._______.                                             |                   
        |                                                                                          |

Can you share me the software how to conveter eeprom 6m to ladder
My mail: [email protected]
Thanks friend

[wahidbashir]

Hi f-bu,
we need ladder printout to diagnose an issue related to spindle fault and had done copy of plc eprom. Can you do it please.
here are attached bin files.

[baonam2019]

Can you share me the software how to conveter eeprom 6m to ladder
My mail: [email protected]
Thanks friend

I also need this software, you send it to me by mail [email protected]

[baonam2019]

Hi f-bu,
we need ladder printout to diagnose an issue related to spindle fault and had done copy of plc eprom. Can you do it please.
here are attached bin files.

Have you converted to ladder yet?

[kfarid]

Hi guys
Can anybody explain what PC PARAMETERS 3001~3004 are in Fanuc 6T controller?
I have a turret problem and doesn't change the tool