Anybody with a post, or at least some programming info for a tosnuc 777 control please respond.
We are purchasing a used toshiba next week, and of course, new programs are required immediately!!
Any help at all greatly appreciated.
Simon.Canada
Thread: post for tosnuc 777
Results 1 to 3 of 3
-
04-12-2007, 03:15 PM #1
Registered
- Join Date
- May 2005
- Posts
- 7
post for tosnuc 777
-
04-13-2007, 05:45 AM #2
Registered
- Join Date
- Mar 2006
- Posts
- 1013
Maybe you'd like to give us some details, like ... is it a mill or a lathe? How many axes? I dont think you want us to send you a random post that's labeled "Tosnuc".
The more you give us, the more we can help.
Mike MatteraTips For Manufacturing Training CD's, DVD's for Mastercam, SolidWorks, Inventor, G-Code Training & More
http://www.tipsforcadcam.com
-
08-27-2008, 07:38 AM #3
Registered
- Join Date
- Aug 2008
- Posts
- 14
A TOSNUC 777 CONTROL will read standard ISO (G code and M code.) It reads with or without a decimal point. eg: if you want an X coordinate of + one hundred millimeters it will read :X100 or X100.
If the post has trailing zeros (X100000) you would need to add the decimal point eg : X100.000 or it will think it is 100 meters, so an okuma or fanuc post will work fine.
you need a list of G codes as it has a lot of its own very cool canned cycles.
It has lots of other very cool stuff as well,I love em.
Reply With Quote
Posting Permissions
