586,108 active members*
3,269 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > stepper motor is running noisy !

Thread: stepper motor is running noisy !

Results 1 to 5 of 5
  1. 07-24-2019, 01:22 PM #1
    Telsiz
    Telsiz is offline
    Join Date
    Oct 2018
    Posts
    3

    stepper motor is running noisy !

    Hi friends
    The stepper motors at mini cnc are running noisy.And the rpm does not exceed 250 mm / min.
    Can you provide help for the solution.
    System:
    Reply With Quote Reply With Quote
  2. 07-25-2019, 04:32 AM #2
    CitizenOfDreams
    CitizenOfDreams is offline Member
    Join Date
    Nov 2012
    Posts
    1267

    Re: stepper motor is running noisy !

    Stepper motors are noisy, not much can be done about it. The only thing I found that helps a little bit is changing the coupler between the motor and the screw.

    Plum couplings:

    Attachment 424446

    seem to transfer less noise than spiral cut couplings:

    Attachment 424448
    Reply With Quote Reply With Quote
  3. 07-26-2019, 07:36 AM #3
    Telsiz
    Telsiz is offline
    Join Date
    Oct 2018
    Posts
    3

    Re: stepper motor is running noisy !

    Motor neden devir artm?yor acaba?
    Reply With Quote Reply With Quote
  4. 07-26-2019, 01:02 PM #4
    wmgeorge
    wmgeorge is offline Member
    Join Date
    Sep 2005
    Posts
    1740

    Re: stepper motor is running noisy !

    Do a Search for setting up and tuning a Stepper motor.
    Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
    Reply With Quote Reply With Quote
  5. 07-29-2019, 01:39 PM #5
    Telsiz
    Telsiz is offline
    Join Date
    Oct 2018
    Posts
    3

    Re: stepper motor is running noisy !

    @wmgeorge yard?m için buray? seçtim umar?m.Burda o ki?i vard?r.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. ESS running a stepper motor as a spindle
    By dmauch in forum SmoothStepper Motion Control
    Replies: 1
    Last Post: 05-20-2016, 02:36 AM
  2. Motor/stepper issue : blocking, slowing down, being noisy
    By nicolasd5150 in forum Mach Software (ArtSoft software)
    Replies: 3
    Last Post: 04-27-2015, 04:37 PM
  3. Drove gantry into hard stop, now stepper motor is very noisy
    By N2950H in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 10
    Last Post: 01-23-2015, 02:12 PM
  4. Running unipolar stepper motor with TIP120
    By helow in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 06-26-2010, 09:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules