setting up my mist coolant with g540, mach3. my air solenoid is rated at 6.5w (0.54a, 12v). g540 output can handle up to an amp right? so should be fine without a relay? or bad idea?
setting up my mist coolant with g540, mach3. my air solenoid is rated at 6.5w (0.54a, 12v). g540 output can handle up to an amp right? so should be fine without a relay? or bad idea?
-------------------------------------------------
Homann Designs - http://www.homanndesigns.com/store
Hi,
Yes it is 1A per output.
Cheers
Peter
Sent from my iPhone using Tapatalk
-------------------------------------------------
Homann Designs - http://www.homanndesigns.com/store
Another method if a VFD is used, is to operate the solenoid from a VFD output which can be either set to turn on/off by the At Zero or At Speed parameter.
A manual SW can be introduced if over-ride is needed.
Al.
CNC, Mechatronics Integration and Custom Machine Design
“Logic will get you from A to B. Imagination will take you everywhere.”
Albert E.