Hi guy's, I was hoping someone could help me out, I just purchased an 80's Delta Vh-3600 cnc knee mill and the controller is bad. It is an Anilam Crusader M. I want to run Linuxcnc on it but I want to reuse the SEM servo motors type MT30m4-59 and the drives that are EG&G Torque Systems servo drive model ACU3015-100D, the servos are DC brushed 142 volts and 2400 rpm. My question is can I make these drives work with the Mesa 5i25 and the 7i77 cards. Any help would be greatly appreciated.
Thanks Mike