[Alex S.A]

Hi does anyone know how to programming CAM in autocad?
Some articles for download, where I can get them and learn more .

Thanks
Alex Sandro

[JHamdan78]

autocad is a cad program only.

[cadcam]

There are some little addins I have seen in the years that will write simple paths inside autocad.

[Greolt]

Ger21 has written a CAM module of some sort that works from within Autocad.

I have not tried it.

Gerry will most likely see this thread and let you know about it.

Greg

[Alan L]

OPEN MINDs hyperMILL is integrated in Autocad 2000~2006. Applications and modules range from 2.5D through 5x milling.

[ger21]

Here's the thread on the macro I wrote. The link to download it is in post #65.
http://www.cnczone.com/forums/showthread.php?t=8226

[ImanCarrot]

I use AutoCad and export the drawing as a DXF file which my Dolphin CAM program can handle.. seems to work fine.

Incidently, on AutoCad, it's under the "Save As" button, not under "Export"... took me a while to suss this lol.

[Alex S.A]

thanks Ger21.
Now i'd like to know how I can applicate ir to make it works. I downloaded the files you indicated above.
I ask you that coz I got interested to know how I can do this.
May you help to applicate it in AutoCad ?