Hello everyone

Anyone done this with good success? I have already lathe sort of ready for this, Emco compact 5 and this is half way refitted with usable electronics. There is only 2 axes, but is it going to be still overcomplicated solution. Currently I can think only negative things about this solution.
-No spindle sync --> no threading
-No canned cycles, this can be avoided
-No tool change or tool library, this one is bad.

Most of these problems can overcome with good control program, but I can´t think any.

Second plan is linux cnc on parellel, but no idea will it do any better, have to investigate on this one.