I have been using BobCAD-CAM since v25. Robust but buggy.
I brought a Solidworks part (.SLDPRT) in, made a complete part out of it and tried to translate and drag to my 0.0.0 but drag does not work. Is there a catch to make it work? Only on Wire Frame or some such (bad word). Oh just got it to work. Select the part before selecting Translate. Wish the doc said something like this.
Results 1 to 3 of 3
-
05-08-2018, 05:30 AM #1
Registered
- Join Date
- Oct 2004
- Posts
- 29
BobCAD-CAM V29 (2301) Utilities Translate Drag does not work
-
05-14-2018, 06:22 PM #2
Member
- Join Date
- Mar 2012
- Posts
- 1570
Re: BobCAD-CAM V29 (2301) Utilities Translate Drag does not work
ok so you are are up and running?
Al DePoalo
Partner Product Manager BobCAD CAM, Inc. 866-408-3226 X147
-
05-14-2018, 11:00 PM #3
Gold Member
- Join Date
- Apr 2009
- Posts
- 3376
Re: BobCAD-CAM V29 (2301) Utilities Translate Drag does not work
that don't sound right,,,but hey if that works for you............
Originally Posted by CEStanley
Reply With QuoteSimilar Threads
-
Drag knife and Bobcad v26
By airbrush in forum BobCad-CamReplies: 7Last Post: 02-28-2018, 09:52 PM -
rotate and translate in bobcad
By redford1955 in forum BobCad-CamReplies: 13Last Post: 06-24-2013, 10:38 PM -
BobCAD CAM Doesn't Work!!!!
By aldepoalo in forum BobCad-CamReplies: 0Last Post: 05-04-2012, 08:58 PM -
How to get V.24 BobCad to recompute toolpaths after translate.
By SPDTool in forum BobCad-CamReplies: 5Last Post: 03-13-2012, 05:42 AM -
Program causing router to drag bit across work
By gob1024s in forum Uncategorised CAM DiscussionReplies: 0Last Post: 03-26-2010, 03:28 PM
Tags for this Thread
Posting Permissions
