Does anybody know if these two are compatible (POKEYS57CNC, UCCNC) or know of any plugin or future coming? This would be great!
Does anybody know if these two are compatible (POKEYS57CNC, UCCNC) or know of any plugin or future coming? This would be great!
No, UCCNC can only use CNC Drive boards.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Use MACH3 or MACH4 with the PoKEYS57CNC. I have MACH4 and have been very happy with the PoKEYS.
You can use the uc100, uc300eth and uc400eth with the uccnc.
uccnc is superior to mach3 and 4, but these controllers also work with mach3 and 4. It is up to you what software you use.
The pokeys only work with mach3 and 4 as far as i know.