Hi all! I am having a problem while cutting MDF with my CNC.
The thing is that where the start node is, the router seems to go a little inwards and ruins the straight edge. I am not sure if I have explained myself correctly, so a picture will illustrate my problem better
Also, here is my cnc code, generated with ArtCam (the piece is a rectangle BTW)
Code:
%
G90
G49
M3 S15000
G0 X423.330 Y198.500 Z5.000
G1 Z-3.100 F3000
G1 X1.500 F4560
X1.500 Y1.500
X438.500 Y1.500
Y198.500
X423.330
G1 Z-6.200 F3000
G1 X1.500 F4560
X1.500 Y1.500
X438.500 Y1.500
Y198.500
X423.330
G0 Z5.000
G0 X0.000 Y0.000
G0Z5.000
X0.000Y0.000
M05
M02
%
Any help will be highly appreciated.
Regards!