Hi,
Fusion 360 seems to require the cutter to be slightly smaller in diameter than the width of the slot. To overcome I have sometimes made the slot slightly wider or the cutter slightly narrower, by 0,01mm. Then it works. Is there any other possibility to overcome this problem?
Results 1 to 9 of 9
Threaded View
-
05-16-2018, 03:01 PM #1
Registered
- Join Date
- May 2018
- Posts
- 1
Fusion 360 CAM: why doesn`t 4mm cutter fit inside 4mm slot?
Reply With QuoteSimilar Threads
-
My chinese laser cutter won't work at all, software doesn't see the cutter
By Sasa1234 in forum Laser Engraving / Cutting Machine General TopicsReplies: 15Last Post: 02-01-2019, 04:09 AM -
PathPilot Preview Doesn't Match Fusion 360 Simulation
By Spiffy Lab in forum Tormach PathPilot™Replies: 1Last Post: 08-09-2016, 09:15 PM -
T SLOT MILLING CUTTER PACKAGE 5 (ON WALTER CNC CUTTER GRINDER)
By dharschman in forum Toolgrinding / Toolgrinding MachinesReplies: 3Last Post: 09-13-2010, 06:25 PM -
cutting a slot with a t-slot cutter
By cncuser1 in forum MastercamReplies: 11Last Post: 09-10-2008, 03:02 AM -
How do I use a dove tool cutter & slot cutter
By bobby1 in forum BobCad-CamReplies: 2Last Post: 04-16-2008, 02:06 AM
Tags for this Thread
Posting Permissions
