Hi,
I need to engrave text on paint. So for example, I have an undercoat and then a top coat and I need to remove just the top coat layer and not go through all the way to the underlying material.
I'm looking in the various types of lasers and CO2 is the most common, but I'm more interested in Fiber and perhaps a simple diode laser might also do the trick? Based on what I'm reading it should be cheaper and less hassle setting up.
Question is, who sells these things? Most are in the 4Kw range, but that is probably way overkill for what I'm trying to do!
These are the only ones that I have managed to find thus far:
https://www.ebay.com.au/sch/i.html?_...laser&_ipg=200
i.e. some brand called JSDU and the wattages seem perfrect for what I'm trying to do.
Any suggestions?