Originally Posted by
Qwasmh
I am working on OKUMA MC-4VAC operating with OSP5020m and i have a problem when transferring G-Code programs to CH0 in machine via RS232C cable.
The problem is character missing in the program with 1000 line or more when revising the machine which sending through CIMCO 6.0 Editor, also when Baud rate of transformation increased missing characters increased.
Communication parameters:
Stop bits: 2.
Baud rate: 600.
Data bits: 7.
Parity: Even.
Flow control/Handshaking: Hardware.
PC O.S: WIN7.
Cable length: 7m.
Thank You,,