Just for clarity of the products that I have and for my sanity... I have 220v at my home and I'm using both a 220v VFD and 220v spindle so nothing I have will be 3 phase unless the VFD is converting to 3 phase which I don't believe is the case.Originally Posted by mactec54
Given that information, if my spindle is 15amp and should draw no more than 1.5 it's amperage (thanks Al) then doesn't that work out to (15*1.5 = 22.5amp max) ?
Thread: Which Spindle and VFD... again
Results 1 to 20 of 237
Threaded View
-
12-29-2018, 02:46 PM #21
Registered
- Join Date
- Mar 2010
- Posts
- 621
Re: Which Spindle and VFD... again
Gecko G540, Rack and Pinion Drives-X and A axis, 1/2-10 5 Start Acme-Z Axis
4-THK HSR 25 Linear Slides, KL23H2100-35-4B, Power Supply-KL-600-48 48V
Reply With QuoteSimilar Threads
-
Quick Change Spindle Adapter for Chinese 2.2kw Spindle? Spindle acronyms?
By dameronw in forum Spindles / VFDReplies: 3Last Post: 10-19-2018, 05:12 PM -
G0704 Spindle bearing upgrade - Vertical play/slop on spindle shaft.
By Signal9 in forum Benchtop MachinesReplies: 35Last Post: 03-21-2017, 02:29 PM -
C11T board - spindle 0-10v output wandering and causing inconsistent spindle speed
By trogan in forum CNC4PCReplies: 6Last Post: 03-20-2017, 09:30 PM -
Spindle motor set,1pcs 2.2kw spindle + inverter+ spindle mount bracket+ER collet
By yvesleeok in forum News AnnouncementsReplies: 5Last Post: 07-19-2013, 05:16 AM -
mach3 spindle dro not working, spindle speed changing while jogging and running code
By jasminder in forum Mach Software (ArtSoft software)Replies: 0Last Post: 02-23-2011, 07:12 AM
Tags for this Thread
Posting Permissions
