Is anyone using Fusion 360 to program their Hardinge lathe? If so which post are you using? Have you edited it to make it better?
Sent from my SM-G955U using Tapatalk
Is anyone using Fusion 360 to program their Hardinge lathe? If so which post are you using? Have you edited it to make it better?
Sent from my SM-G955U using Tapatalk
Yes I have a post that I'm using with the lathe it works okay. It does not do the drilling Cycles. That is just something that I've lived with. Have not spent the time to fix it
Sent from my SM-G955U using Tapatalk
I'm hoping to be the new owner of a Cobra 42 very shortly and just trying to get some information lined up.
For the drilling cycles, does the cobra 42 accept a drilling cycle? Or is it that the post just needs to be formatted to output the code how the cobra needs to see it?
Sent from my SM-T727V using Tapatalk
The post needs to be reformatted to work with the canned cycle for that controller. There is also a deep drilling cycle that is a macro program of the controller that works really well.
I have a lot of extra tool holders for mine. If you need some get in contact with me and I'll see what I can sell.
Also if you're going to do any tapping you we'll need the self-releasing tap holder.
Sent from my SM-G955U using Tapatalk
Cool! That's awesome, once i pick it up and get it setup I'll take a look at the post and see about coding everything for the post to get it working. Any other info on the machine you could share that may get me started in the right direction or things to check would be greatly appreciated!
Chris
Sent from my SM-T727V using Tapatalk