Hi All,

I have a 98' Mazak FJV25 with a 21 position tool changer. The changer is controlled with a Yaskawa Juspoint III model CIMR JP3. I need to figure out how to make minor rotational adjustment for better line up when the spindle comes in to swap tools. There has to be a parameter for the gridshift but I have no idea where to find it. Hopefully the adjustments are made on the Mazatrol M-Plus and not the Juspoint directly as I'm sure that requires special cables and software. I also can't get the machine to allow single step tool change for adjustment and calibration. Any info would be greatly appreciated.