I am crossing one 8020 3060 over the top of an 8020 3030 at 90 degrees. Is it stronger to use carriage bolts and U bolt plates or counterbores with anchors?
bgasser
Kansas City
Thread: Anchors vs Carriage bolts
Results 1 to 4 of 4
Threaded View
-
06-11-2018, 02:31 PM #1
Registered
- Join Date
- Jan 2018
- Posts
- 22
Anchors vs Carriage bolts
Reply With QuoteSimilar Threads
-
Boat Anchors hahaha! Light Machines CNC Lathe & Mill
By Contract_Pilot in forum Benchtop MachinesReplies: 5Last Post: 11-19-2016, 08:45 PM -
Long carriage is better? ok!MGN12 L= 400mm rail + MGN12H Long carriage are USD110.00!
By yvesleeok in forum News AnnouncementsReplies: 0Last Post: 07-27-2013, 06:39 AM -
Press Brake for Pipe shoes and anchors
By yinkaakins2001 in forum Want To Buy...Need help!Replies: 0Last Post: 11-13-2012, 07:57 AM -
Question about 80/20 and Carriage Bolts
By Go-Go-Legoman in forum DIY CNC Router Table MachinesReplies: 3Last Post: 11-30-2011, 12:58 AM -
Need dimensions for housing bolts (not mounting bolts)
By rcpilot82 in forum Stepper Motors / DrivesReplies: 3Last Post: 09-22-2011, 02:29 AM
Tags for this Thread
Posting Permissions
