I have a DAHLIH MCV-2100 with the hydraulic tool change. Yesterday when I went to do a tool change, the tool changer stopped after pulling the tool out and moving the arm to the down position. So I reset the machine got the arm back into home position and tried to step throught the tool change procedure.
M19 (Spindle orient), M81 (Tool pot down), M82 (Tool catch), when I went to do M83 (ATC Change) nothing happen. So today when I started looking into it again I got to the M83 and it wouldn't go, then the machine stopped at the M82 command, a few more times and it stopped at the M81 command and now it won't even complete the M19 command. Anybody ever have a situation like this?? How did you fix it?? Any suggestions welcome.
Thread: Tool change decay.
Results 1 to 2 of 2
-
04-20-2007, 03:01 PM #1
Registered
- Join Date
- Mar 2007
- Posts
- 122
Tool change decay.
-
02-08-2014, 09:43 PM #2
Registered
- Join Date
- Oct 2012
- Posts
- 23
Check the inductive sensor on top of the drawbar. That solved the problem for me on our mcv 1700
Skickat från min GT-I9100 via Tapatalk
Reply With QuoteSimilar Threads
-
How to change Tool change position(About MAZATROL T1 control)
By liushuixingyun in forum Mazak, Mitsubishi, MazatrolReplies: 6Last Post: 01-07-2014, 01:33 AM -
tool change
By jrick in forum Commercial CNC Wood RoutersReplies: 0Last Post: 01-14-2007, 12:01 AM -
Tool change
By lilricky2 in forum BobCad-CamReplies: 2Last Post: 06-03-2006, 07:00 PM -
tool change
By Dwallace in forum CNC (Mill / Lathe) Control Software (NC)Replies: 1Last Post: 03-24-2005, 07:17 PM -
Tool Change
By WOODKNACK in forum Uncategorised CAM DiscussionReplies: 10Last Post: 07-13-2003, 03:26 AM
Tags for this Thread
Posting Permissions
