Hello,
i recently designed my warm-up program and used this block (G4F500) in top of the warm-up program to make wait time .
Is that right and no problems with my machine?
Thank you.
Hello,
i recently designed my warm-up program and used this block (G4F500) in top of the warm-up program to make wait time .
Is that right and no problems with my machine?
Thank you.
G04 is dwell and typically you use an axis for dwell times.
Eg,
G04 X5. (5 second dwell)
But dwells don't actually do anything so machine should be fine.
the answer depends on the control brand and model
Fanuc
okuma
siemans
ect