Looking for 2 parts to be made from 6061. Both are pretty small.
Tolerances are +/- .002 with the exception of the bearing pockets (see picture). Bearing pockets I would like to hold +/- .0001.
Both pieces are to be made from .0625" +/- .005.
These can have a mill finish as they will be sand blasted.
All I have are the picture and a .dxf. Hopefully you can work with these.
Please email me at [email protected]. Please no PM's on here.
Let me know if I forgot anything and thanks for looking.
Thread: 2d 6061 relatively small parts
Results 1 to 3 of 3
-
06-29-2018, 02:35 PM #1
Registered
- Join Date
- Nov 2010
- Posts
- 64
2d 6061 relatively small parts
-
07-02-2018, 11:06 PM #2
Registered
- Join Date
- Nov 2010
- Posts
- 64
Re: 2d 6061 relatively small parts
Looking for 25pcs of each
-
07-09-2018, 04:07 PM #3
Registered
- Join Date
- Dec 2010
- Posts
- 141
Re: 2d 6061 relatively small parts
The problem with quoting is that they are very thin parts and not easily held, the DXF files need a lot of help and pretty small quantities.
Reply With QuoteSimilar Threads
-
Small Parts 6061-T6
By AutoTechUSA in forum North America RFQ'sReplies: 3Last Post: 02-16-2016, 04:16 PM -
RFQ- CNC Milled 6061 small aluminum parts
By 526minis in forum North America RFQ'sReplies: 1Last Post: 11-30-2014, 12:53 AM -
Small 6061-T6 Aluminum Parts 30mm x 65mm x 2mm, qty. 200
By logicform in forum North America RFQ'sReplies: 1Last Post: 10-19-2013, 01:48 AM -
Small (1 sqr inch) 6061 Alu parts, Hardcoat anodized
By KevinWilkins in forum Employment OpportunityReplies: 24Last Post: 03-11-2010, 06:35 PM -
2 small 6061-t6 HEX bar parts. LATHE only
By aaron p in forum Employment OpportunityReplies: 10Last Post: 04-21-2009, 05:34 AM
Tags for this Thread
Posting Permissions
