Hello every one,
I have a 5axismaker machine (
5axismaker 5 axis CNC Mill & 3D Printer) which I use with Fusion 360 (and the post processor 5AXISMAKER) and Mach3. I made a simple model (a cube with some inscriptions) and for the tool path, I used "2D pocket". But When I try to load the G-code in Mach3, this message appear: Current point same as end point of arc. Block=X11.235 Y72.294 Z-93.669 R1.425
I understand what is wrong, but I don’t know how to fix it knowing I shouldn’t have to change the G-code (Fusion 360 is supposed to generate it for me). Is that a problem with Mach3 ? Do I have to modify some line in the G-code ?
here is the g-code and the problematic line according to Mach3 (between ***):
X12.45 Y71.459 Z-61.131
G0 X7.25
Y73.522 Z-92.352
G1 X9.45 F720.
X9.597 Y73.56 Z-92.348
X9.706 Y73.666 Z-92.34
X9.75 Y73.811 Z-92.342
G2 X9.828 Y75.138 Z-93.859 R1.425
X9.906 Y73.622 Z-95.186 R1.425
X9.984 Y72.294 Z-93.669 R1.425
X10.063 Y73.811 Z-92.342 R1.425
X10.141 Y75.138 Z-93.859 R1.425
X10.219 Y73.622 Z-95.186 R1.425
X10.297 Y72.294 Z-93.669 R1.425
X10.375 Y73.811 Z-92.342 R1.425
X10.453 Y75.138 Z-93.859 R1.425
X10.532 Y73.622 Z-95.186 R1.425
X10.61 Y72.294 Z-93.669 R1.425
X10.688 Y73.811 Z-92.342 R1.425
X10.766 Y75.138 Z-93.859 R1.425
X10.844 Y73.622 Z-95.186 R1.425
X10.922 Y72.294 Z-93.669 R1.425
X11.001 Y73.811 Z-92.342 R1.425
X11.079 Y75.138 Z-93.859 R1.425
X11.157 Y73.622 Z-95.186 R1.425
X11.235 Y72.294 Z-93.669 R1.425
***X11.313 Y73.811 Z-92.342 R1.425*** (there is no space before and after in my G-code, this is just for visual gain)
X11.391 Y75.138 Z-93.859 R1.425
X11.47 Y73.622 Z-95.186 R1.425
X11.548 Y72.294 Z-93.669 R1.425
X11.626 Y73.811 Z-92.342 R1.425
X11.704 Y75.138 Z-93.859 R1.425
X11.782 Y73.622 Z-95.186 R1.425
X11.86 Y72.294 Z-93.669 R1.425
X11.939 Y73.811 Z-92.342 R1.425
X12.017 Y75.138 Z-93.859 R1.425
X12.095 Y73.622 Z-95.186 R1.425
X12.173 Y72.294 Z-93.669 R1.425
X12.251 Y73.811 Z-92.342 R1.425
X12.329 Y75.138 Z-93.859 R1.425
X12.408 Y73.622 Z-95.186 R1.425
X12.486 Y72.294 Z-93.669 R1.425
X12.564 Y73.811 Z-92.342 R1.425
X12.642 Y75.138 Z-93.859 R1.425
X12.72 Y73.622 Z-95.186 R1.425
X12.75 Y72.839 Z-94.887 R1.425
G3 Y71.048 Z-93.984 R5.149
G1 Y71.015 Z-93.968
Y70.99 Z-93.941
If you have any advice for me, I will take it with pleasure,
And by the way, do you know if there is a limit of line for the G-code that Mach3 can accept ?
cheers,