My Mach3 USB Bob only gives 0.6v on any of my output pins...... And the weird thing is when I use my tester and I ground it on COM and put the positive end on my output pin I get 5v.....something is wrong.... But what?
Thread: Mach3 output pin only gives 0.6v
Results 1 to 3 of 3
Threaded View
-
07-11-2018, 09:30 PM #1
Registered
- Join Date
- Mar 2018
- Posts
- 22
Mach3 output pin only gives 0.6v
Reply With QuoteSimilar Threads
-
Mach3 spi signal output
By rakolju in forum Mach Wizards, Macros, & AddonsReplies: 0Last Post: 11-29-2015, 10:07 PM -
RPM output for mach3
By ballistic42 in forum Benchtop MachinesReplies: 4Last Post: 02-24-2015, 12:01 AM -
Mach3 & Output 1
By LisBonMekat in forum Mach MillReplies: 2Last Post: 01-01-2015, 04:02 PM -
Need 5v output when mach3 E-stop is on, not off
By GITRDUN in forum Mach Software (ArtSoft software)Replies: 4Last Post: 04-14-2014, 06:18 PM -
Mach3 output signal
By salvanosalvador in forum Machines running Mach SoftwareReplies: 2Last Post: 04-21-2013, 04:51 PM
Tags for this Thread
Posting Permissions
