[Patoca]

When I command, e.g.:

G10 L2 P1 X1.0 Z1.0

WCS does not change, if I check work coordinates G54-59 all of them still are 0.0, control does not pop any alarm

I do not know if control is capable to admit G10 or there is a parameter that has to be set in order to admit the changes

is there another way to specify the WCS without the usage of G10??


Thank you in advance,

[dcoupar]

According to my F6M-B manual, G10 was an option. I'm surprised you don't get an alarm. Maybe your control has the Custom Macro option installed. If so, you could assign G54 X and Z with a macro statement, i.e.:

#2401=1.0 (G54 X)
#2701=1.0 (G54 Z)


Check your 6T manual (I don't have one), to see if these variable #s are different for a T model than an M.