Hi , I built my own 4 axis dental milling machine. It works under Mach 3 so and I need to adapt the 2015 Delcam Dentmill CAM software for my machine kinematics. Is it possible ? All I know is about to create post procesor .
Hi , I built my own 4 axis dental milling machine. It works under Mach 3 so and I need to adapt the 2015 Delcam Dentmill CAM software for my machine kinematics. Is it possible ? All I know is about to create post procesor .
If your milling machine only has four axes, the kinematics aren't too complicated. Set up X, Y, and Z as linear Cartesian axes, and A as a rotary axis parallel to X calibrated in degrees. You can do all that in Mach3. If you know how to create the post-processor for that CAM program, it should just work. If not, you should be able to get help from DelCAM, or Autodesk, which acquired them.
Is that a picture of your "Babin" machine? It looks more like a lathe than a mill...
Hola, tengo un proyecto similar al que expone en este hilo.... me gustaria saber si ha podido encontrar un postprocesador para esta situacion.... es decir que trabaje desde Dentmill a Mach3.... seria una gran ayuda para mi. Muchas gracias.