I have a Mori Seki ZL203. We had the machine moved. when moving the machine the Riggers dropped it from about 3 feet. The door slammed, the key hit the door lock switch hard and out of alignment. Smashing the switch. When we ran new electric to this machine and
powered it up the door lock switch would not work. I replaced the switch with a Mori switch. We still could not get the machine out of an E-stop type of alarm. We traced it back to the Servo Amp A03B-0814-B102. Fanuc did not have any so we had it rebuilt by IRC. Now
The door lock sequence starts to work when powering up the machine but when it tells you to open and close the door i get the EX1061 alarm. Does anyone have any ideas. Thanks.