586,103 active members*
2,629 visitors online*
Register for free
Login

Thread: G93 Time Resolution

Results 1 to 4 of 4
  1. 09-01-2018, 07:30 PM #1
    JerryBurks
    JerryBurks is offline Registered
    Join Date
    Aug 2011
    Posts
    999

    G93 Time Resolution

    I am trying to use the G93 feed rate specification for rotary machining. I do have tool paths cosisting of very short strokes, sometimes less than a millimeter.
    At typical feed rates that will result in execution times of under 10 ms per stroke and F-Word numbers >6000.

    Is that a problem (using an MK2 board)? What are the limits of time resolution, anyway?

    Thanks, JB
    Box Joint and Dovetail CAM software here: WWW.TAILMAKER.NET
    Reply With Quote Reply With Quote
  2. 09-01-2018, 08:56 PM #2
    PlanetCNC
    PlanetCNC is offline Moderator
    Join Date
    Mar 2017
    Posts
    1312

    Re: G93 Time Resolution

    Please send your g-code and settings to our support.
    Reply With Quote Reply With Quote
  3. 09-01-2018, 10:10 PM #3
    JerryBurks
    JerryBurks is offline Registered
    Join Date
    Aug 2011
    Posts
    999

    Re: G93 Time Resolution

    email sent
    Box Joint and Dovetail CAM software here: WWW.TAILMAKER.NET
    Reply With Quote Reply With Quote
  4. 09-04-2018, 02:32 PM #4
    PlanetCNC
    PlanetCNC is offline Moderator
    Join Date
    Mar 2017
    Posts
    1312

    Re: G93 Time Resolution

    We tested this with Mk2 and Mk3 controller.

    Unfortunately Mk2 controller cannot perform fluently in G93 mode. Its processor does not support the firmware updates (advanced motion algorithms).

    Mk3 controller performs this much better, specially with latest PlanetCNC TNG software.

    Best regards, Team PlanetCNC
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. total on time and toal running time in fanuc?
    By maan_sunny in forum Machinery Manuals / Brochures
    Replies: 2
    Last Post: 01-25-2016, 06:48 AM
  2. Bar feed cycle time over - How do I find the Param to change time allowed b4 alarm?
    By MCImes in forum Fanuc
    Replies: 0
    Last Post: 04-24-2012, 01:46 PM
  3. CNC resolution
    By sinha_nsit in forum Mechanical Calculations/Engineering Design
    Replies: 10
    Last Post: 10-22-2008, 10:11 AM
  4. Resolution
    By Laff Riot in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 05-29-2003, 08:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules