I have a Bridgeport VMC with TNC 410. Machine worked good, but starts showing the communication from title. When Z axis down with bigger feed (around 7000) stopped and showing this error.
I do not know what is going on. 5 minutes ago machine working normally.
In service manual I found discription of this error:
The current speed of the motor is not expected
at Imax. The direction of rotation is possibly not correct.
Results 1 to 2 of 2
-
08-22-2018, 08:27 PM #1
Member
- Join Date
- Jun 2015
- Posts
- 46
Heidenhain TNC410 - Motor Z: speed not equal to Imax
-
08-23-2018, 09:11 AM #2
Member
- Join Date
- Jun 2015
- Posts
- 46
Today when I turned on machine and they staying with tool (without movement) show error: Movement monitoring error in Z
Reply With QuoteSimilar Threads
-
Post for Mastercam x6 for Heidenhain TNC410
By cncuserx in forum Post Processors for MCReplies: 1Last Post: 10-03-2020, 08:26 AM -
Heidenhain TNC410 - Motor Z: speed not equal to Imax
By witbike in forum HEIDENHAIN -> GENERICReplies: 0Last Post: 08-19-2018, 07:37 AM -
VMC 800/22 heidenhain TNC410 MA
By Norcom in forum Bridgeport / Hardinge MillsReplies: 3Last Post: 11-30-2016, 09:03 PM -
Heidenhain TNC410 and TNC426 or alternative?
By Stuki-5 in forum BobCad Post ProcessorsReplies: 1Last Post: 05-06-2014, 10:11 AM -
heidenhain tnc410 post
By Goran P. in forum MastercamReplies: 15Last Post: 05-09-2013, 12:10 PM
Tags for this Thread
Posting Permissions
